At Ultradyne USA, we are proud of our new line of firearms accessories. One of the most important aspects of getting the best results from your Ultradyne products is to ensure that they are set up properly.

Today, we have Bob Zara demonstrating how easy it is to get our C4 Dynamount Front Sight and the Apollo muzzle device installed correctly.

Before beginning installation, you will need to make sure you have all of the tools and parts handy. Check that you have the timing nut, the muzzle device and the Dynamount Front Sight. Also, decide if you’d like to mount your front sight in the standard or 45 degree offset configuration. For tightening, you will need a torque wrench and standard wrenches as detailed in the chart below. To double-check alignment, you can use a level as a reference after installation. For a more detailed information, please refer to the instructions here.

 

Device

Wrench Flat

Apollo 223

13/16 inch

Apollo 308

13/16 inch

Mercury 223

¾ inch

Athena 223

7/8 inch

 

Still have questions? We have answers! Reach out to us at info@ultradyneusa.com with your questions and we’d be happy to help.

Thanks for choosing Ultradyne!

Learn how to install a Ultradyne compensator with the Dynamount Front Sight from our video: